How fast is this train moving? How high are we flying? I started experimenting with my phone’s GPS during train journeys and flights, using SpeedX to display speed and altitude and record my trips.

The most interesting discovery was how much reception depended on where I placed the phone. An older train could give me a usable GPS signal inside the carriage, while a Chinese high-speed train or an aircraft often required a spot right beside the window.

Trying it on different trains

On some older trains, I could receive GPS signals without keeping my phone against a window. That made recording a journey fairly straightforward: open SpeedX, start recording, and watch the speed as the train moved along.

My guess is that these carriages provided less effective electromagnetic shielding. A metal carriage can act somewhat like a Faraday cage, weakening radio signals from outside. Its construction and openings may help explain why reception differed, but I did not measure the shielding itself. “Older trains have weaker shielding” is a possible explanation for my results, rather than something this experiment proves.

On the Chinese high-speed trains I tested, the experience was different. I could only get a usable GPS signal near the window. Moving the phone farther into the carriage made it much harder to maintain reception.

That small change in position mattered more than I expected. For these journeys, a window seat was useful for more than the view: it also gave my phone a better chance of recording the trip.

The same pattern in the air

On flights, I found a similar limitation. GPS reception was only usable beside the window in my tests. Farther inside the cabin, getting a fix was difficult.

With reception available, SpeedX made the journey more interesting by showing speed and altitude alongside the trip recording. These readings gave me another way to follow the flight beyond looking out of the window.

These were informal experiments on the journeys I took, rather than controlled comparisons of train or aircraft models. I would not assume that every window seat will work equally well, or that every older carriage will have good reception.

The broader point is that the receiver’s surroundings matter. GPS.gov explains that signal blockage, reflected signals, satellite geometry, and receiver design all affect GPS accuracy. My window-seat observations fit that general picture, though they do not identify the exact cause in each vehicle.

Why I like SpeedX for this

For this kind of travel experiment, I recommend giving SpeedX a try. It brings together a speedometer, an altimeter, and trip recording, with an interface inspired by physical instrument gauges.

That instrument-panel approach suits the experience. Speed and altitude are things I want to read at a glance, and the gauges give them a clear visual focus. On a train, speed is the number I am most curious about; on a flight, altitude becomes just as interesting. Recording the journey gives those live readings some context afterward.

My preferred travel dashboard would put a large speed reading next to altitude, keep the units clearly visible, and leave the recording status easy to check. A clear indication of whether location data is fresh would also help when reception drops. Those are the interface priorities I would choose for a screen used beside a train or aircraft window.

A small experiment for the next journey

The basic process is simple: start a trip recording in SpeedX, check whether the readings update, and compare reception near the window with reception farther inside. On flights, I follow the crew’s instructions for phone use and airplane mode.

I would also treat gaps in a recording as part of the experiment. An app can display and record the data a phone receives, but it cannot remove the physical limits of reception inside a vehicle.

What began as curiosity about speed turned into a useful reminder: sometimes, moving a phone a short distance toward a window makes all the difference.